T44.2X5D

ICD-10-CM Official Guidelines for Coding and Reporting, quoted in full. Published by CMS and NCHS; in the public domain.

I.A.4 Placeholder character names this code p.7

The ICD-10-CM utilizes a placeholder character “X”. The “X” is used as a placeholder at certain codes to allow for future expansion. An example of this is at the poisoning, adverse effect and underdosing codes, categories T36-T50. Where a placeholder exists, the X must be used in order for the code to be considered a valid code.

I.C.19.e Adverse Effects, Poisoning, Underdosing and Toxic Effects names this code p.82

Codes in categories T36-T65 are combination codes that include the substance that was taken as well as the intent. No additional external cause code is required for poisonings, toxic effects, adverse effects and underdosing codes.

I.C.19.e.5.a Adverse Effect names this code p.83

When coding an adverse effect of a drug that has been correctly prescribed and properly administered, assign the appropriate code for the nature of the adverse effect followed by the appropriate code for the adverse effect of the drug (T36-T50). The code for th th the drug should have a 5 or 6 character “5” (for example T36.0X5-) Examples of the nature of an adverse effect are tachycardia, delirium, gastrointestinal hemorrhaging, vomiting, hypokalemia, hepatitis, renal failure, or respiratory failure.

I.C.19.e.5.b Poisoning names this code p.83

When coding a poisoning or reaction to the improper use of a medication (e.g., overdose, wrong substance given or taken in error, wrong route of administration), first assign the appropriate code from categories T36-T50. The poisoning codes have an th th associated intent as their 5 or 6 character (accidental, intentional self-harm, assault and undetermined). If the intent of the poisoning is unknown or unspecified, code the intent as accidental intent. The undetermined intent is only for use if the documentation in the record specifies that the intent cannot be determined. Use additional code(s) for all manifestations of poisonings. If there is also a diagnosis of abuse or dependence of the substance, the abuse or dependence is assigned as an additional code. Examples of poisoning include: (i) Error was made in drug prescription Errors made in drug prescription or in the administration of the drug by provider, nurse, patient, or other person. (ii) Overdose of a drug intentionally taken If an overdose of a drug was intentionally taken or administered and resulted in drug toxicity, it would be coded as a poisoning. (iii)Nonprescribed drug taken with correctly prescribed and properly administered drug If a nonprescribed drug or medicinal agent was taken in combination with a correctly prescribed and properly administered drug, any drug toxicity or other reaction resulting from the interaction of the two drugs would be classified as a poisoning. (iv)Interaction of drug(s) and alcohol When a reaction results from the interaction of a drug(s) and alcohol, this would be classified as poisoning. See Section I.C.4. if poisoning is the result of insulin pump malfunctions. For Sequela (Late Effects) see Section I.B.10.

I.C.19.e.5.c Underdosing names this code p.84

Underdosing refers to taking less of a medication than is prescribed by a provider or a manufacturer’s instruction. Discontinuing the use of a prescribed medication on the patient's own initiative (not directed by the patient's provider) is also classified as an underdosing. For underdosing, assign the code from categories T36-T50 (fifth or sixth character “6”). Documentation of a change in the patient’s condition is not required in order to assign an underdosing code. Documentation that the patient is taking less of a medication than is prescribed or discontinued the prescribed medication is sufficient for code assignment. Codes for underdosing should never be assigned as principal or first-listed codes. If a patient has a relapse or exacerbation of the medical condition for which the drug is prescribed because of the reduction in dose, then the medical condition itself should be coded. Noncompliance (Z91.12-, Z91.13-, Z91.14- and Z91.A4-) or complication of care (Y63.6-Y63.9) codes are to be used with an underdosing code to indicate intent, if known.

I.C.19.a Application of 7 Characters in Chapter 19 chapter guidance p.77

Most categories in chapter 19 have a 7 character requirement for each applicable code. Most categories in this chapter have three 7 character values (with the exception of fractures): A, initial encounter, D, subsequent encounter and S, sequela. Categories for traumatic fractures have additional 7 character values. While the patient may be seen by a new or different provider over the course of treatment for an injury, assignment of the 7 character is based on whether the patient is undergoing active treatment and not whether the provider is seeing the patient for the first time. For complication codes, active treatment refers to treatment for the condition described by the code, even though it may be related to an earlier precipitating problem. For example, code T84.50XA, Infection and inflammatory reaction due to unspecified internal joint prosthesis, initial encounter, is used when active treatment is provided for the infection, even though the condition relates to the prosthetic device, implant or graft that was placed at a previous encounter. 7 character “A”, initial encounter is used for each encounter where the patient is receiving active treatment for the condition. 7 character “D” subsequent encounter is used for encounters after the patient has completed active treatment of the condition and is receiving routine care for the condition during the healing or recovery phase. The aftercare Z codes should not be used for aftercare for conditions such as injuries or poisonings, where 7 characters are provided to identify subsequent care. For example, for aftercare of an injury, assign the acute injury code with the 7 character “D” (subsequent encounter). 7 character “S”, sequela, is for use for complications or conditions that arise as a direct result of a condition, such as scar formation after a burn. The scars are sequelae of the burn. When using 7 character “S”, it is necessary to use both the injury code that precipitated the sequela and the code for the sequela itself. The “S” is added only to the injury code, not the sequela code. The 7 character “S” identifies the injury responsible for the sequela. The specific type of sequela (e.g. scar) is sequenced first, followed by the injury code. See Section I.B.10. Sequelae, (Late Effects)

I.C.19.b Coding of Injuries chapter guidance p.78

When coding injuries, assign separate codes for each injury unless a combination code is provided, in which case the combination code is assigned. Codes from category T07, Unspecified multiple injuries should not be assigned in the inpatient setting unless information for a more specific code is not available. Traumatic injury codes (S00- T14.9) are not to be used for normal, healing surgical wounds or to identify complications of surgical wounds. The code for the most serious injury, as determined by the provider and the focus of treatment, is sequenced first.

I.C.19.b.1 Superficial injuries chapter guidance p.78

Superficial injuries such as abrasions or contusions are not coded when associated with more severe injuries of the same site.

I.C.19.b.2 Primary injury with damage to nerves/blood vessels chapter guidance p.78

When a primary injury results in minor damage to peripheral nerves or blood vessels, the primary injury is sequenced first with additional code(s) for injuries to nerves and spinal cord (such as category S04), and/or injury to blood vessels (such as category S15). When the primary injury is to the blood vessels or nerves, that injury should be sequenced first.

I.C.19.b.3 Iatrogenic injuries chapter guidance p.79

Injury codes from Chapter 19 should not be assigned for injuries that occur during, or as a result of, a medical intervention. Assign the appropriate complication code(s).

I.C.19.c Coding of Traumatic Fractures chapter guidance p.79

The principles of multiple coding of injuries should be followed in coding fractures. Fractures of specified sites are coded individually by site in accordance with both the provisions within categories S02, S12, S22, S32, S42, S49, S52, S59, S62, S72, S79, S82, S89, S92 and the level of detail furnished by medical record content. A fracture not indicated as open or closed should be coded to closed. A fracture not indicated whether displaced or not displaced should be coded to displaced. More specific guidelines are as follows:

I.C.19.c.1 Initial vs. subsequent encounter for fractures chapter guidance p.79

Traumatic fractures are coded using the appropriate 7 character for initial encounter (A, B, C) for each encounter where the patient is receiving active treatment for the fracture. The appropriate 7 character for initial encounter should also be assigned for a patient who delayed seeking treatment for the fracture or nonunion. Fractures are coded using the appropriate 7 character for subsequent care for encounters after the patient has completed active treatment of the fracture and is receiving routine care for the fracture during the healing or recovery phase. Care for complications of surgical treatment for fracture repairs during the healing or recovery phase should be coded with the appropriate complication codes. Care of complications of fractures, such as malunion and nonunion, should be reported with the appropriate 7 character for subsequent care with nonunion (K, M, N,) or subsequent care with malunion (P, Q, R). Malunion/nonunion: The appropriate 7 character for initial encounter should also be assigned for a patient who delayed seeking treatment for the fracture or nonunion. The open fracture designations in the assignment of the 7th character for fractures of the forearm, femur and lower leg, including ankle are based on the Gustilo open fracture classification. When the Gustilo classification type is not specified for an open fracture, the 7th character for open fracture type I or II should be assigned (B, E, H, M, Q). A code from category M80, not a traumatic fracture code, should be used for any patient with known osteoporosis who suffers a fracture, even if the patient had a minor fall or trauma, if that fall or trauma would not usually break a normal, healthy bone. See Section I.C.13. Osteoporosis. The aftercare Z codes should not be used for aftercare for traumatic fractures. For aftercare of a traumatic fracture, assign the acute fracture code with the appropriate 7 character.

I.C.19.c.2 Multiple fractures sequencing chapter guidance p.80

Multiple fractures are sequenced in accordance with the severity of the fracture.

I.C.19.c.3 Physeal fractures chapter guidance p.80

For physeal fractures, assign only the code identifying the type of physeal fracture. Do not assign a separate code to identify the specific bone that is fractured.

I.C.19.d Coding of Burns and Corrosions chapter guidance p.80

The ICD-10-CM makes a distinction between burns and corrosions. The burn codes are for thermal burns, except sunburns, that come from a heat source, such as a fire or hot appliance. The burn codes are also for burns resulting from electricity and radiation. Corrosions are burns due to chemicals. The guidelines are the same for burns and corrosions. Current burns (T20-T25) are classified by depth, extent and by agent (X code). Burns are classified by depth as first degree (erythema), second degree (blistering), and third degree (full-thickness involvement). Burns of the eye and internal organs (T26-T28) are classified by site, but not by degree.

I.C.19.d.1 Sequencing of burn and related condition codes chapter guidance p.80

Sequence first the code that reflects the highest degree of burn when more than one burn is present. a. When the reason for the admission or encounter is for treatment of external multiple burns, sequence first the code that reflects the burn of the highest degree. b. When a patient has both internal and external burns, the circumstances of admission govern the selection of the principal diagnosis or first-listed diagnosis. c. When a patient is admitted for burn injuries and other related conditions such as smoke inhalation and/or respiratory failure, the circumstances of admission govern the selection of the principal or first-listed diagnosis.

I.C.19.d.2 Burns of the same anatomic site chapter guidance p.81

Classify burns of the same anatomic site and on the same side but of different degrees to the subcategory identifying the highest degree recorded in the diagnosis (e.g., for second and third degree burns of right thigh, assign only code T24.311-).

I.C.19.d.3 Non-healing burns chapter guidance p.81

Non-healing burns are coded as acute burns. Necrosis of burned skin should be coded as a non-healed burn.

I.C.19.d.4 Infected burn chapter guidance p.81

For any documented infected burn site, use an additional code for the infection.

I.C.19.d.5 Assign separate codes for each burn site chapter guidance p.81

When coding burns, assign separate codes for each burn site. Category T30, Burn and corrosion, body region unspecified is extremely vague and should rarely be used. Codes for burns of "multiple sites" should only be assigned when the medical record documentation does not specify the individual sites.

I.C.19.d.6 Burns and corrosions classified according to extent of body chapter guidance p.81

surface involved Assign codes from category T31, Burns classified according to extent of body surface involved, or T32, Corrosions classified according to extent of body surface involved, for acute burns or corrosions when the site of the burn or corrosion is not specified or when there is a need for additional data. It is advisable to use category T31 as additional coding when needed to provide data for evaluating burn mortality, such as that needed by burn units. It is also advisable to use category T31 as an additional code for reporting purposes when there is mention of a third- degree burn involving 20 percent or more of the body surface. Codes from categories T31 and T32 should not be used for sequelae of burns or corrosions. Categories T31 and T32 are based on the classic “rule of nines” in estimating body surface involved: head and neck are assigned nine percent, each arm nine percent, each leg 18 percent, the anterior trunk 18 percent, posterior trunk 18 percent, and genitalia one percent. Providers may change these percentage assignments where necessary to accommodate infants and children who have proportionately larger heads than adults, and patients who have large buttocks, thighs, or abdomen that involve burns.

I.C.19.d.7 Encounters for treatment of sequela of burns chapter guidance p.82

Encounters for the treatment of the late effects of burns or corrosions (i.e., scars or joint contractures) should be coded with a burn or corrosion code with the 7 character “S” for sequela.

I.C.19.d.8 Sequelae with a late effect code and current burn chapter guidance p.82

When appropriate, both a code for a current burn or corrosion with 7 character “A” or “D” and a burn or corrosion code with 7 character “S” may be assigned on the same record (when both a current burn and sequelae of an old burn exist). Burns and corrosions do not heal at the same rate and a current healing wound may still exist with sequela of a healed burn or corrosion. See Section I.B.10. Sequela (Late Effects)

I.C.19.d.9 Use of an external cause code with burns and corrosions chapter guidance p.82

An external cause code should be used with burns and corrosions to identify the source and intent of the burn, as well as the place where it occurred.

Risk adjustment

This code